Small Aluminum Can Crusher
The SC7080 is a compact, cost-effective aluminum can crusher designed for small-to-medium UBC recyclers, beverage manufacturers and scrap dealers processing used beverage cans and aluminum tins.
- Motor Power
- 30–55 kW
- Feed Opening
- 600 × 760 mm
- Throughput
- 0.5–2 t/h (loose cans)
- Output Size
- 20–60 mm
How it works
The SC7080 handles used beverage cans and aluminum tins. Its low power consumption (30–55kW) and simple operation make it the entry-level choice for small recyclers, beverage manufacturers and scrap dealers in emerging markets across Southeast Asia, Africa, and Latin America.
A crusher breaks material by impact and compression inside a chamber. Rotating hammers or blades throw the feed against fixed liners until it fractures, and a screen or grate at the discharge keeps oversize pieces in the chamber for another pass. The result is a denser, more uniform product than a shredder produces, which is why crushers sit downstream of shredding in most flows.
Chamber geometry is what makes a crusher material-specific. Aluminium profiles need a chamber that grips long sections without letting them spin; motor stators need enough clearance for the steel shell to open before the winding is released; swarf needs a chamber that will not compact the chips into a mat. This is why the same drive power appears across very different machines.
Key features
- Compact footprint (suitable for container deployment)
- Low-speed, high-torque crushing minimizes paint fume and dust generation
- Interchangeable screens produce output chips sized for baling or direct remelting
- Simple maintenance: hammers replaceable without special tools in under 1 hour
- Low noise operation (≤80 dB) — suitable for urban workshop environments
- Three-phase power, compatible with local voltage specifications (custom on request)
How to choose crushers and granulators
- Match the chamber to the shape of the feed: long profiles, hollow cans, enclosed motors and loose swarf each behave differently even at the same tonnage.
- Size the drive against the hardest single piece, not the average. A chamber that is right for mixed light scrap will bog down on a solid casting.
- Check the discharge arrangement — screen aperture, grate or open discharge — against the size your buyer or next machine expects.
- Ask how the chamber is opened for clearing a blockage and how the blades or hammers are changed; this is the difference between a one-hour and a one-shift job.
Technical data
| Motor Power | 30–55 kW |
|---|---|
| Feed Opening | 600 × 760 mm |
| Throughput | 0.5–2 t/h (loose cans) |
| Output Size | 20–60 mm |
| Applicable Materials | Used beverage cans (UBC), aluminum food tins, aluminum foil products |
Specifications are indicative for the model family and are confirmed against your material in the quotation. Wear parts, power supply and control options are listed per project.
Frequently asked questions
What capacity does the Small Aluminum Can Crusher handle?
0.5–2 t/h (loose cans). Throughput depends on the material, its bulk density and how evenly the machine is fed, so the figure is confirmed against your material in the quotation.
What power supply does the Small Aluminum Can Crusher need?
30–55 kW. Confirm the supply available on site — voltage, phases and available capacity — before the machine is configured, because the drive is built to the destination supply.
How do I get a price for the Small Aluminum Can Crusher?
There is no list price — every unit is configured to the material first, because the drive, chamber or coil changes with it. Send the material you process, the throughput you need per hour and the destination port, and the quotation is built on those three.
What is the difference between a crusher and a shredder?
A shredder tears material apart and tolerates mixed, bulky feed. A crusher breaks it by impact against fixed liners inside a chamber and holds it there until it is small enough to pass a screen, so the output is denser and more uniform. In a recycling line the shredder normally comes first and the crusher second.
Can one crusher handle several different materials?
It can, within limits. The chamber geometry that grips aluminium profiles is not the one that releases a motor winding cleanly, so a machine configured for one feed stream is usually kept on it. Where a plant switches materials regularly, the practical answer is a chamber with interchangeable screens and a rotor that can be re-bladed.
Often specified together
Scrap Aluminum Crusher
The SC1210 scrap aluminum crusher is purpose-built for the secondary aluminum industry, delivering efficient size reduction of aluminum profiles.
Aluminum Profile Crusher
The SC1214 is the higher-power sibling of the SC1210, designed for processors handling larger-volume or heavier-gauge aluminum scrap.
Metal Chips & Swarf Crusher
Machining centers and CNC facilities generate large volumes of metal turnings, chips and swarf — materials that in their long, tangled form are difficult to transport, weigh or charge into a furnace.